• Definition of reaction pathways for catalytic aquathermolysis of Liaohe heavy crude oil 

  Tirado Kota Aleksis; Felix Lugo Jose Guillermo; Varfolomeev Mikhail Alekseevich; Yuan Chengdong; Ancheyta Juarez Jorge (2023)

  A set of kinetic parameters capable of predicting the distribution of SARA fractions of oil and gas production for the catalytic aquathermolysis of Liaohe extra-heavy crude oil was optimized with literature experimental ...
• Analysis of kinetic models for hydrocracking of heavy oils for In-situ and Ex-situ applications 

  Felix Lugo Jose Guillermo; Tirado Kota Aleksis; Yuan Chengdong; Varfolomeev Mikhail Alekseevich; Ancheyta Juarez Jorge (2022)

  In-situ processing has been suggested as an alternative for upgrading heavy oils and bitumen directly in the reservoir. However, there is not much information on the kinetic of the reactions occurring during this process. ...
• Kinetics of heavy oil non-catalytic aquathermolysis with and without stoichiometric coefficients 

  Tirado Kota Aleksis; Felix Lugo Jose Guillermo; Kvofie Maykl; Al-Muntaser Ameen Ahmed; Varfolomeev Mikhail Alekseevich; Yuan Chengdong; Ancheyta Juarez Jorge (2022)

  The aquathermolysis process is considered an efficient method to improve fluidity properties in-situ and increase the degree of oil extraction (recovery factor) from downhole hard-to-recover reserves. In this work, the ...
• Comparison of hydrocracking kinetic models based on SARA fractions obtained in slurry-phase reactor 

  Felix Lugo Jose Guillermo; Ancheyta Juarez Jorge (2019)

  Four kinetic models based on the SARA fractions were compared for the hydrocracking of heavy crude oil with mineral catalyst in slurry-phase. The reaction rate coefficients and activation energies were calculated with ...
• Important Keys in the Estimation of Parameters During Hydrocracking Kinetic Modelling 

  Felix Lugo Jose Guillermo (2020)

  Due to the large amount of compounds present in heavy crudes and bitumens, kinetic modeling of hydrocracking is generally used lumping models to simplify calculations. One way to ensure that the model regime depends only ...

Больше