Experimental results for inactivation of microorganism test strains of S. aureus, E. coli, P. aeruginosa separately and in such consortium by air plasma jet are presented. For monocultures of S. aureus, E. coli, P. aeruginosa ...

The report deals with the investigation of the low-current glow discharge with a hollow cathode and hollow anode in the trigger unit of a cold-cathode thyratron. Two discharge regimes were observed: the so-called hindered ...

Since many years carbon dioxide reduction by hydrogen through catalyst processes is a usual way from the Paul Sabatier reaction to produce CH4. this process is able to be done from thermal process by using an heterogeneous ...

The structure, surface and electrochemical properties of polypropylene track-etched membrane with a polymer layer obtained by plasma polymerization of hexamethyldisilazane have been studied.

Analysis of the discharge current waveform, E/N and ionization rate (α-η) showed that different modes of dielectric barrier discharge (DBD) were realized in 1-mm air gap at nanosecond (ns) and microsecond (us) voltage fall ...

The difference of DBD ignition in symmetrical and asymmetrical discharge gap was studied. The numerical simulation of electric field near the bare grounded electrode is presented to explain it.

This work was aimed at studying the effect of DC discharge plasma modification of films casted from various chitosan samples and chitosan/poly(L,L-lactide)/gelatin graft-copolymers on their surface properties, chemical ...

A use of the four-probe resistance measurements as a tool for characterization of a quality of titanium nitride thin films deposited by the reactive dc magnetron sputtering will be discussed in the report. Few series of ~ ...

In an electrophysical installation, a mixture of CH4 and C2H6 was treated by a barrier discharge. The hydrocarbon conversion was experimentally recorded. For the developed plasma chemical reactor, with help of the solver ...

We study self-propulsion of a metal-coated grains, suspended in gas, under laser irradiation. The motion is caused by photophoresis: i.e., absorption of a laser at the metal-coated surface of the particle creates radiometric ...