Научные публикации в Scopus: Новые поступления

Отображаемые элементы 5981-6000 из 24551

Research of the impact of low-frequency pulse force of lorentz on the process of motion of conducting liquid

Ilyin V.; Koppen D.; Khaibullina A.; Ilyin O.; Sabitov L. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The aim of the work was a numerical and experimental study of the influence of the low-frequency pulsed strength of the electromagnetic (EM) field (Lorentz force) on the melt ...
Physical and mechanical properties of fiber reinforced gypsum-based composite

Mukhametrakhimov R.; Lukmanova L.; Gilmanshin I. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. Formulations of effective gypsum-fiber and gypsum-cement-fiber materials modified with active mineral additives and superplasticizer have been developed in the present ...
Justification of requirements to quality and accuracy of blankfor precision stamping

Shibakov V.; Pankratov D.; Nizamov R.; Nizamova L.; Khairullin R. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The dispersion of blank masses depending on the accuracy class of the initial metal rolling is estimated. The influence of the method of the initial blank segments on the ...
Bevel gears monitoring methods developmentin the total contact patch terms

Safarov D.; Kondrashov A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The article describes the main provisions of the method, which allows to perform the control of the gear rims of bevel gears according to the shape and relative position of ...
The technological stresses of carbon-filled plastics arising during the pressing of prepregs

Shafigullin L.; Romanova N.; Israfilov D.; Shakirova G. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The technological stresses of carbon-filled plastics based on epoxy resins arising during the pressing of prepregs were investigated.
The concept of quality management systems and monitoring of their effectiveness using "lean production" concept

Plugatyreva O.; Khusnutdinova E. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. An overview of the concepts of the quality management system is given, ways of monitoring their effectiveness are explored using the concept of "Lean Production".
The state of the technical level of domestic agricultural machinery

Kashapov N.; Nafikov M.; Nigmatzyanov A.; Gajnutdinov I. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. Comparative tests of domestic and foreign equipment designed for carrying out soil tillage and sowing, plant protection techniques and the application of organic and mineral ...
RANS simulation for the prediction of heat transfer for staggered tube bundle in cross-flow

Haibullina A.; Chirukhin K.; Sabitov L.; Hayrullin A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. In this paper, RANS models for predicting heat transfer for triangular staggered arrangement tube bundle in cross-flow studied. The results of the numerical study were compared ...
Development of turning-filtering mechanismof centrifuges

Karataeva E.; Lashkov V.; Brodt A.; Akhlyamov M. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. Analysis of the literature revealed a lack of filtering centrifuges, which include the difficulty of regenerating the filtering surface. The presented constructive solutions ...
Improving the process efficiency of helical gears' toothed rims at the stage of pre-production

Safarov D.; Kondrashov A.; Khafizov I. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The article reveals modes of increasing the efficiency of preproduction process for manufacturing nodes with helical gears. The increased efficiency is ensured by processing ...
Revisiting the calculations techniques of the optimal planning methods for the local authority activities (on the Republic of Tatarstan example)

Shikhalev A.; Akhmetova I.; Vorontsov D.; Khananova A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The indicators of Savrushinsky local municipal structures development in the Republic of Tatarstan (RT) are defined on the basis of creation, receiving and the analysis of ...
Structure formation in materials based on Fe-C-Si and Fe-C-Al systems (cast irons) prepared from dispersed mechanical engineering waste

Bikulov R. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The paper presents fn alternative technological process for producing compact forms of graphite inclusions in the materials based on the Fe-C-Si and Fe-C-Al (cast iron) ...
Rotor film reactor

Gainullina L.; Tutubalina V.; Sabitov L. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. In this work the description of a design of the rotating film reactor and its features. The rotating film reactor is intended for processes of homogenization of various ...
Modified gypsum-cement-pozzolanic composites reinforced with polypropylene fibers

Mukhametrakhimov R.; Galautdinov A.; Gilmanshin I. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The paper shows the effectiveness of the use of a polyfunctional complex modifier for a gypsum-cement-pozzolanic binder (GCPB), which allows reducing the water requirement ...
Technological complexes of laser welding and hardening tool

Zvezdin V.; Hisamutdinov R.; Saubanov R.; Rakhimov R.; Sirkin S. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The control system of the automated laser technological complex for the technology of surfacing and hardening the cutting edge of the teeth of the mill with the positioning ...
Development of digital and robotic agricultural production in the Russian Federation

Kashapov N.; Nafikov M.; Nigmatzyanov A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. In recent decades, the rural population has increased dramatically. These circumstances necessitate the use of digital, intelligent and robotic. In the agro-industrial complex, ...
Machine elements evaluation diagnostic devices development using compressed air on crankshaft bearings example

Kulakov A.; Barylnikova E. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. Devices for diagnosing the degree of wear of crankshaft bearings, suitable for embedding in the on-board system for diagnosing a vehicle during its operation have been developed.
Studying the Effects of Mechanical Loads and Environmental Conditions on the Drive-Axle Performance

Barykin A.; Mukhametdinov M.; Takhaviyev R.; Samigullin A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. The paper discusses the problem of achieving the required output parameters of a truck drive under various operating conditions. The authors enumerate the final-drive and ...
Numerical study and calculation of the structures of the stands with canopies on the wind impact, taking into account the terrain

Shmelev G.; Sabitov L.; Galimullin I.; Khaidarov L.; Antonov A. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. Operation of stands with canopies is possible under different landscape conditions, including conditions in areas with a slope or in areas with various obstacles that change ...
The design of automotive alternator with high efficiency

Khafizov A.; Valiev R.; Akhmetshin R.; Shakirov Y. (2019)

© 2019 IOP Publishing Ltd. All rights reserved. A technical solution aimed at increasing the motor life and efficiency of the automotive alternator to an average of 80% is suggested by replacing the permanent magnets on ...

Отображаемые элементы 5981-6000 из 24551

Поиск в электронном архиве

Расширенный поиск

Просмотр

Весь электронный архив
Раздел

Новые поступления

Научные публикации в Scopus: Новые поступления

Поиск в электронном архиве

Просмотр

Весь электронный архив

Раздел

Моя учетная запись