Показать сокращенную информацию
dc.contributor.author | Budarova O.P. | |
dc.contributor.author | Boldyrev S.V. | |
dc.date.accessioned | 2021-02-25T20:38:02Z | |
dc.date.available | 2021-02-25T20:38:02Z | |
dc.date.issued | 2020 | |
dc.identifier.issn | 1068-3666 | |
dc.identifier.uri | https://dspace.kpfu.ru/xmlui/handle/net/162124 | |
dc.description.abstract | © 2020, Allerton Press, Inc. Abstract: Workbench testing results are presented for axial piston pumps at a water content in oil up to 3%. It is shown that the wear rate of the pump pistons depends on the water content mainly according to a logarithmic law and retains a tendency to increase with an increase in the water content over 3%. The friction surface roughness of the piston depends on the water content in oil according to a power law, reaching a constant value at a water content over 2.5%. It has been found that the wear rate of the pistons decreases with increasing pressure in the hydraulic system. | |
dc.relation.ispartofseries | Journal of Friction and Wear | |
dc.subject | friction pairs | |
dc.subject | pump testing | |
dc.subject | roughness | |
dc.subject | water-contaminated oil | |
dc.subject | wear rate | |
dc.title | The Wear of a Piston–Sleeve Friction Pair in Axial-Piston Pumps under the Conditions of Water-Contaminated Lubricating Oil | |
dc.type | Article | |
dc.relation.ispartofseries-issue | 1 | |
dc.relation.ispartofseries-volume | 41 | |
dc.collection | Публикации сотрудников КФУ | |
dc.relation.startpage | 31 | |
dc.source.id | SCOPUS10683666-2020-41-1-SID85082120815 |