dc.contributor.author |
Budarova O.P. |
|
dc.contributor.author |
Boldyrev S.V. |
|
dc.date.accessioned |
2021-02-25T20:38:02Z |
|
dc.date.available |
2021-02-25T20:38:02Z |
|
dc.date.issued |
2020 |
|
dc.identifier.issn |
1068-3666 |
|
dc.identifier.uri |
https://dspace.kpfu.ru/xmlui/handle/net/162124 |
|
dc.description.abstract |
© 2020, Allerton Press, Inc. Abstract: Workbench testing results are presented for axial piston pumps at a water content in oil up to 3%. It is shown that the wear rate of the pump pistons depends on the water content mainly according to a logarithmic law and retains a tendency to increase with an increase in the water content over 3%. The friction surface roughness of the piston depends on the water content in oil according to a power law, reaching a constant value at a water content over 2.5%. It has been found that the wear rate of the pistons decreases with increasing pressure in the hydraulic system. |
|
dc.relation.ispartofseries |
Journal of Friction and Wear |
|
dc.subject |
friction pairs |
|
dc.subject |
pump testing |
|
dc.subject |
roughness |
|
dc.subject |
water-contaminated oil |
|
dc.subject |
wear rate |
|
dc.title |
The Wear of a Piston–Sleeve Friction Pair in Axial-Piston Pumps under the Conditions of Water-Contaminated Lubricating Oil |
|
dc.type |
Article |
|
dc.relation.ispartofseries-issue |
1 |
|
dc.relation.ispartofseries-volume |
41 |
|
dc.collection |
Публикации сотрудников КФУ |
|
dc.relation.startpage |
31 |
|
dc.source.id |
SCOPUS10683666-2020-41-1-SID85082120815 |
|