Показать сокращенную информацию
dc.contributor.author | Baygildin E.R. | |
dc.contributor.author | Bolotov A.V. | |
dc.contributor.author | Kadyrov R.I. | |
dc.contributor.author | Varfolomeev M.A. | |
dc.contributor.author | Minkhanov I.F. | |
dc.date.accessioned | 2021-02-25T06:51:18Z | |
dc.date.available | 2021-02-25T06:51:18Z | |
dc.date.issued | 2020 | |
dc.identifier.issn | 1314-2704 | |
dc.identifier.uri | https://dspace.kpfu.ru/xmlui/handle/net/161098 | |
dc.description.abstract | © 2020 International Multidisciplinary Scientific Geoconference. All rights reserved. In this work the quality of the slim-tube packing was demonstrated, the inner diameter and porosity was determined by using X-ray computed tomography. The literature analysis of slim tube packing over was carried out. It is noted that in all cases of slim tube does not accept the most theoretically possible dense rhombic packaging. Moreover, the presence of interstices due to loose contact of the grains to each other illustrates the technological limitations when filling out. To confirm the absence of signs of defective packing, it is recommended to check the quality of the slim-tube. | |
dc.relation.ispartofseries | International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM | |
dc.subject | Gas injection | |
dc.subject | Packing | |
dc.subject | Slim-tube | |
dc.subject | X-ray tomography | |
dc.title | Technical requirements for measurements of minimal miscible pressure for gas injection using slim tube | |
dc.type | Conference Paper | |
dc.relation.ispartofseries-issue | 1.2 | |
dc.relation.ispartofseries-volume | 2020-August | |
dc.collection | Публикации сотрудников КФУ | |
dc.relation.startpage | 785 | |
dc.source.id | SCOPUS13142704-2020-2020-12-SID85099726912 |