Kazan Federal University Digital Repository

Ultrasound-assisted extrusion of construction ceramic samples

Show simple item record

dc.contributor.author Faseeva G.
dc.contributor.author Nafikov R.
dc.contributor.author Lapuk S.
dc.contributor.author Zakharov Y.
dc.contributor.author Novik A.
dc.contributor.author Vjuginova A.
dc.contributor.author Kabirov R.
dc.contributor.author Garipov L.
dc.date.accessioned 2018-09-19T20:27:36Z
dc.date.available 2018-09-19T20:27:36Z
dc.date.issued 2017
dc.identifier.issn 0272-8842
dc.identifier.uri https://dspace.kpfu.ru/xmlui/handle/net/142925
dc.description.abstract © 2017 Elsevier Ltd and Techna Group S.r.l.The conditions for a decrease in friction during ceramic brick production between a mixture and an extruder die under the influence of 20–30 kHz ultrasound applied to the die are calculated. An optimum design of a die used to mold 30 mm diameter cylindrical samples with a resonance in this frequency range is selected using computer modeling. From the results, a titanium die is fabricated and tested on a Verdes–050 (Spain) laboratory extruder using an ultrasonic magnetostrictive transducer with a power of 1.5 kW (Inlab-Ultrazvuk, Russia). A 12% reduction in extrusion pressure, a 20% acceleration of molding and a positive influence on the properties of the ceramics were found. The surface of the ceramic samples was covered by craters with diameters of approximately 10 µm due to the boiling of water, and the porosity of the main body of the samples decreased. This technique prevents the undesirable rapid drying of the surface when the samples exit the die and stabilizes the strength of the fired samples. The color remained unchanged, the water absorption decreased, the density, strength and resistance to frost increased. Ultrasonic extrusion increased the accuracy of the strength tests of construction ceramics, indicating the prospect of ultrasonic die development for industrial extruders for bricks, facing tiles and roof tiles.
dc.relation.ispartofseries Ceramics International
dc.subject Brick
dc.subject Construction ceramics
dc.subject Die
dc.subject Extrusion
dc.subject Ultrasound
dc.title Ultrasound-assisted extrusion of construction ceramic samples
dc.type Article
dc.relation.ispartofseries-issue 9
dc.relation.ispartofseries-volume 43
dc.collection Публикации сотрудников КФУ
dc.relation.startpage 7202
dc.source.id SCOPUS02728842-2017-43-9-SID85014210376


Files in this item

This item appears in the following Collection(s)

  • Публикации сотрудников КФУ Scopus [24551]
    Коллекция содержит публикации сотрудников Казанского федерального (до 2010 года Казанского государственного) университета, проиндексированные в БД Scopus, начиная с 1970г.

Show simple item record

Search DSpace


Advanced Search

Browse

My Account

Statistics