Kazan Federal University Digital Repository

FMR investigations of half-metallic ferromagnets

Show simple item record

dc.contributor.author Rameev B.
dc.contributor.author Yildiz F.
dc.contributor.author Kazan S.
dc.contributor.author Aktas B.
dc.contributor.author Gupta A.
dc.contributor.author Tagirov L.
dc.contributor.author Rata D.
dc.contributor.author Buergler D.
dc.contributor.author Gruenberg P.
dc.contributor.author Schneider C.
dc.contributor.author Kämmerer S.
dc.contributor.author Reiss G.
dc.contributor.author Hütten A.
dc.date.accessioned 2018-09-18T20:27:30Z
dc.date.available 2018-09-18T20:27:30Z
dc.date.issued 2006
dc.identifier.issn 1862-6300
dc.identifier.uri https://dspace.kpfu.ru/xmlui/handle/net/140092
dc.description.abstract Thin films of various half-metallic ferromagnets, such as chromium dioxide (CrO 2) and Heusler alloys (Co 2Cr 0.6Fe 0.4Al, Co 2MnSi) have been investigated by ferromagnetic resonance (FMR) technique. It is demonstrated that FMR is a very efficient method to study the nanoscale magnetic properties, in particular to probe the magnetic anisotropy and magnetic inhomogeneities of ferromagnetic thin films. Epitaxial CrO 2 thin films of various thicknesses (25-535 nm) have been deposited on TiO 2(100) substrates by chemical vapor deposition process. It is shown that the magnetic behavior of the CrO 2 films results from a competition between the magnetocrystalline and strain anisotropies. For the ultrathin CrO 2 film (25 nm) the magnetic easy axis switches from the c-direction to the b-direction of the rutile structure. Thin-film Co 2Cr 0.6Fe 0.4Al samples (25 nm or 100 nm) have been grown by DC magnetron sputtering either on unbuffered SiO 2(100) substrates or on the substrates capped by a 50 nm thick V buffer layer. The effects of the vanadium buffer layer and of the film thickness are revealed by FMR studies of the Co 2Cr 0.6Fe 0.4Al samples. Well-resolved multiple spin-wave modes are observed in the unbuffered Co 2Cr 0.6Fe 0.4Al sample with a thickness of 100 nm and the exchange stiffness constant has been estimated. Thin films of Co 2MnSi (4-100 nm) have been grown by DC sputtering on silicon substrates on top of a 42 nm thick V seed layer and capped either by Al 2O 3 or by Co and V layers. A set of the 80 nm thick films has been annealed at different temperatures in the range of 425-550°C. FMR studies of the Co 2MnSi samples shows that at the fixed annealing temperature (450°C) the highest magnetization is observed in the sample with a thickness of 61 nm, while the thicker samples (100 nm) reveal not only a lower magnetization but greater magnetic inhomogeneity as well. An annealing treatment at T ≥ 450°C is essential to obtain higher magnetization as well as uniform magnetic properties in the Co 2MnSi films. Weak SWR modes have also been observed in the thick Heusler films. © 2006 WILEY-VCH Verlag GmbH & Co. KGaA.
dc.relation.ispartofseries Physica Status Solidi (A) Applications and Materials Science
dc.title FMR investigations of half-metallic ferromagnets
dc.type Article
dc.relation.ispartofseries-issue 7
dc.relation.ispartofseries-volume 203
dc.collection Публикации сотрудников КФУ
dc.relation.startpage 1503
dc.source.id SCOPUS18626300-2006-203-7-SID33745055789


Files in this item

This item appears in the following Collection(s)

  • Публикации сотрудников КФУ Scopus [24551]
    Коллекция содержит публикации сотрудников Казанского федерального (до 2010 года Казанского государственного) университета, проиндексированные в БД Scopus, начиная с 1970г.

Show simple item record

Search DSpace


Advanced Search

Browse

My Account

Statistics