Aerosol fluxing in electro arc metallization

dc.contributor.author	Logachev V.
dc.contributor.author	Kolomeichenko A.
dc.contributor.author	Kuznetsov Y.
dc.contributor.author	Solovev R.
dc.contributor.author	Denisov V.
dc.contributor.author	Sharifullin S.
dc.date.accessioned	2018-04-05T07:10:04Z
dc.date.available	2018-04-05T07:10:04Z
dc.date.issued	2017
dc.identifier.issn	1757-8981
dc.identifier.uri	http://dspace.kpfu.ru/xmlui/handle/net/130177
dc.description.abstract	© Published under licence by IOP Publishing Ltd. The main structural and technological factors of electric arc metallizers, which significantly affect the quality of their operation, are considered. The results of experimental studies on the adhesion strength, porosity, microhardness and comparative wear resistance of coatings obtained by electroarc metallization are presented. Optimal modes of coating with electroarc metallization are determined. It is established that the use of aerosol fluxing during electric arc metallization provides an increase in adhesion-cohesive strength by 25 ⋯ 30%, an increase in microhardness to 40%, a decrease in porosity by 20 ⋯ 25%.
dc.relation.ispartofseries	IOP Conference Series: Materials Science and Engineering
dc.title	Aerosol fluxing in electro arc metallization
dc.type	Conference Paper
dc.relation.ispartofseries-issue	1
dc.relation.ispartofseries-volume	240
dc.collection	Публикации сотрудников КФУ
dc.source.id	SCOPUS17578981-2017-240-1-SID85034079396

Файлы в этом документе

Размер: 46.11Kb

Формат: PDF

Публикации сотрудников КФУ Scopus [24551]
Коллекция содержит публикации сотрудников Казанского федерального (до 2010 года Казанского государственного) университета, проиндексированные в БД Scopus, начиная с 1970г.